arrow_back العودة إلى الأعمال الحرة
F

2-layer ESP32 PCB design review before fabrication (KiCad)

Freelancer

مشاركة:
placeTR home_workعن بُعد assignmentبعقد publicوظيفة مجمّعة · TR

eventنُشرت في 17 نوفمبر 2026 · verifiedتحققنا في 18 نوفمبر 2026 من أنها ما زالت متاحة

هل هذه شركتك؟

US$ 30 – US$ 60 / لكل مشروع

عن الوظيفة

We need an experienced hardware engineer to review a 2-layer PCB (schematic + layout) before we order 5 assembled prototypes at JLCPCB. Board: 2-layer, 110 x 85 mm, 1.6 mm, KiCad 9. DRC and ERC are clean; we want a second pair of eyes on the design itself. Main blocks: - ESP32-WROOM-32E module (antenna keep-out and board-edge placement) - 5 V USB-C input, TVS, PTC and TPS259470 eFuse (UVLO/OVLO divider, current limit, dV/dt) - 1117-type 3.3 V LDO (thermal margin) - CH340C USB-UART with EN/IO0 auto-program circuit, USB ESD protection, USB-C CC resistors - 4x 74HCT245 level shifters (3.3 V GPIO to 5 V) driving 2x HUB75 and 2x HUB12 LED panel connectors - DS3231 RTC with CR2032 backup, I2C pull-ups - MT3608 5 V to 12 V boost driving a horn through an N-MOSFET low-side switch Deliverable: a written review covering schematic and layout, listing concrete issues with designator/net, a short explanation and a severity (critical / should fix / minor). Delivery within 3 days of receiving the files. Files shared with the awarded freelancer only: KiCad project, Gerber, BOM, CPL (pick-and-place), schematic PDF. In your bid please state: 1) Your experience with ESP32 boards (designs you have reviewed or built) 2) Your experience with JLCPCB assembly (BOM/CPL, part rotation issues) 3) Your delivery time Fixed price. No design changes needed from you, only the review.

تابع القراءة مجانًا

أنشئ حسابًا مجانيًا لعرض الوظيفة كاملة والتقديم عليها.

  • badgeملف مرئي للشركات
  • notificationsتنبيه بالوظائف الجديدة عبر البريد الإلكتروني
  • favoriteاشتراك مجاني، يمكنك الإلغاء في أي وقت