2026年11月19日に公開 · 2026年11月19日時点で募集中であることを確認済みです
この企業はあなたの会社ですか?US$ 20.000 – US$ 50.000 /案件
I want to deliver a self-contained LED display controller that combines a media player and an LED sending unit in one compact, fanless metal enclosure. The unit takes live HDMI input (up to 1920×1200@60, with custom resolutions up to 4096 pixels on one side) and also plays content from internal storage (≥ 32 GB) or USB. It decodes H.264/H.265/VP9 up to 4K@60 and drives full-color LED screens of up to 2.3 million pixels through four dedicated Gigabit LED output ports to receiving cards, with optional 2+2 port redundancy. Other interfaces: HDMI loop-out, Wi-Fi, optional 4G/5G, two sensor inputs and stereo audio. Operating range is −20 to +60 °C. The device registers with a cloud CMS so content can be scheduled, pushed and monitored remotely, and it keeps playing its schedule offline whenever the network drops. The key differentiator is direct industrial control. A built-in Modbus TCP server, with no external gateway, lets any PLC or SCADA system blank or unblank the screen, adjust brightness, select pre-loaded messages or playlists by ID, and raise or clear priority alarms. Control follows a Variable Message Sign model with three modes (Normal, Remote, Alarm). Commands are confirmed through a sequence-number handshake with result codes, and status is read back: active content and its checksum, HDMI and LED port status, temperature and uptime. Reliability features are required: hardware watchdog, independent Modbus service, event logs and signed firmware updates. Preliminary block diagrams, preferred chipsets and a requirements specification are available. Your task is to turn them into a production-ready board, FPGA/firmware stack and configuration utility. Deliverables Schematics, PCB Gerbers and BOM FPGA sending design and LED mapping up to 2.3 MP across 4 ports, compatible with the selected receiving-card system Bootable embedded Linux/Android firmware image with 4K decode, HDMI capture and offline scheduling Modbus TCP server with a fully documented, versioned register map Cloud CMS client (MQTT/REST) with asset sync and heartbeat Factory test tool and desktop or browser-based configuration utility Enclosure, wiring and thermal guidelines English documentation sufficient for CE/FCC submission and OEM servicing Full source code and IP transferred to the client Acceptance criteria Smooth 4K@60 decode, scaled correctly to the LED layout Pixel-accurate mapping on all 4 ports Automatic switch to offline playback when the WAN is lost An alarm appears on screen within 1 s of the PLC command Modbus interoperability verified with at least two mainstream PLC platforms, for example Siemens S7-1200/1500 and Mitsubishi, Omron or Schneider Requirements for bidders Proven experience designing LED display controllers: sending/receiving cards, FPGA-based LED data transmission or LED multimedia players. Please include shipped products or projects in your proposal. Hands-on experience with embedded video pipelines and industrial protocols (Modbus TCP) Teams based in Vietnam are strongly preferred, so that we can run on-site prototype testing, integration with real LED screens and PLCs, and close coordination in the same time zone. Please include in your proposal: relevant past work, proposed architecture and chipset, milestone plan with timeline, number of prototype units included, and an estimated BOM cost.
無料アカウントを作成すると、求人の全文を見て応募できます。